Windows XP Setup (Classic View) - DSL - Ethernet Setup

Before setting up your computer, follow the links below to setup your DSL Modem.

DSL Modem Setup
Zoom Modem Zoom X3/X4 Zoom X5	Westell Modem Westell 2100

NOTE: The default settings in Windows XP are correct. This guide is to set your Network Settings back to default.


If you are using Category View, click here.



1. Click Start, then click Control Panel





If you are using Category View, click here.

2. Click on Network Connections (Classic View)





3. Double Click on "Local Area Connection" (Ethernet)






4. Click on the "Properties" button.







5. Select "Internet Protocol (TCP/IP)" - DO NOT uncheck the box
6. Click the "Properties" button







7. Select "Obtain an IP address automatically"

8. Select " Obtain DNS server address automatically"

9. Click "OK"






10. Click "OK" on the Local Area Connection Properties window



11. On the Local Area Connection Status window, the Status should read "Connected"

If you status is Disconnected, be sure that the DSL Modem is plugged in and turned on. Try Disabling the connection and re-enabling it. Make sure that the Ethernet cable is plugged into the correct jack on the back of the computer and on the DSL modem.

FINISHED

You should now be able to browse the internet. If you are still unable to browse, try re-starting the computer.


Return to DSL Support Center